Edelbrock Supercharger #15284 is for the 2018-2020 Jeep Wrangler JL/Gladiator JT with the 3.6L Pentastar V6 engine. 50-state emissions-legal and fits under the factory hood with no modification. Not compatible with eTorque Hybrid models.
The industry's most reliable forced induction system is now available for the 2018-2020 Jeep Wrangler JL and Gladiator JT with the 3.6L Pentastar V6 engine. The Edelbrock Supercharger With Tuner #15284 is engineered to deliver a 46% increase in rear-wheel horsepower with 26.9% more rear-wheel torque in a 50-state emissions-legal bolt-on kit that fits under the factory hood with no modification. This kit features the latest TVS R1320 rotor assembly in an Edelbrock supercharger housing mated to a lower manifold with a high-capacity dual-pass intercooler. An integrated bypass valve helps to eliminate parasitic power loss under light throttle while helping to improve mileage potential under normal driving conditions. This kit comes with all necessary hardware, hoses, tuner and full-color installation manual to simplify the installation. Edelbrock Superchargers for the 2018-20 Jeep JL/JT are manufactured by Edelbrock in the USA and include a free 3-Year/36,000-mile powertrain warranty when the supplied calibration is used. Not compatible with eTorque Hybrid models.
Application Summary:
| Year |
Make/Model |
| 2020 |
Jeep Gladiator |
| 2018-2020 |
Jeep Wrangler |
| Attributes |
| Air Filter Included |
Yes |
| Calibration |
Yes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Center Housing Cooling Type |
Intercooler |
| Country of Origin (Primary) |
US |
| E.O. |
D-215-118 |
| Emission Code |
Legal US |
| Finish |
Black Powder Coated |
| Fuel Injector Type |
42 |
| Gasket Or Seal Included |
Yes |
| Harmonic Balancer Diameter |
6.1 |
| Harmonized Tariff Code (Schedule B) |
8708996800 |
| Hazardous Material Code |
N |
| Hose Included |
Yes |
| Housing Material |
Cast Aluminum |
| Internal Step Up |
Yes |
| Life Cycle Status Code |
Available to Order |
| Maximum Boost Pressure |
8 |
| Maximum Horsepower |
331RW (8-Speed Auto Trans); With 32.7in Diameter LT285/70R17 Off Road Tires; 4.10 Axle Ratio |
| Maximum Pressure Reading |
8 |
| Maximum Torque |
272RW (8-Speed Auto Trans); With 32.7in Diameter LT285/70R17 Off Road Tires; 4.10 Axle Ratio |
| Mounting Bracket Included |
Yes |
| Mounting Hardware Included |
Yes |
| NAFTA Preference Criterion Code |
B |
| Oil Capacity |
125 |
| Outside Pulley Diameter |
2.625 |
| Pulley Belt Width |
6-Rib |
| Quantity |
Kit |
| RGL |
WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Rotor Type |
Eaton TVS 1320 |
| SDR Required Flag |
N |
| SDS Sheet Number |
NA |
| System Type |
Stage 1 - Street System |
| Universal Or Specific Fit |
Specific |
| Vehicle Model |
Wrangler |
| Warranty Time |
36 |
| GTIN |
00085347152841 |
